Planche À Découper Seanox Sur Crosse

A rod holder provided with a 90°, five-stage swing function dedicated to cruiser and motorboat fishing.

A magic band is set in the rod holder in order to secure the rod at sea.

Swinging left and right and jerking back and forth, and attached or detached with just a single action.

Use the product for a fishing boat where the clamp-type Lark Saouke cannot be mounted. 

Added with a 90° swing function.

Possible to secure the rod holder at a position of 45° left and right according to the flow of the tide.

This makes it possible to change the direction flexibly to avoid entanglement in narrow places. 

855 Grms

114x70x16.5mm

maximum butt diameter : 32 mm

This 100% stainless steel rod holder is open to all fishermen whose platbord is too narrow to insert a recessed rod holder angled (marine Guigo deviation). Just add a flatline clip for a horizontal line.

Résultats de traductionBuilt-in mounting base - Flat edge fixing (121 x 90 mm) - fixing tube Ø 60.3 x 1.5 mm - delivered with waterproof PVC tip (ref 478070) - notched PA6 ring - Marine stainless steel

Rod holder with 3 positions for a rod equipped with spinning or casting.

The 360 ° swivel base

The SPC is a rod holder has multiple settings, you can easily locate your rods in the direction and with the perfect angle in order to be most sensitive to the touch. Ideal for all fisheries in support or stronk fishing.

Adjustable rod holder, multiplication, length 26.5 cm and internal diameter 40 mm. 5 possible orientation pin. MatériauxInox Weight 1, 145 kg

And cane pole with flange diameter 28 balcony support. Tube length 28 cm and internal diameter 40 mm stainless steel materials

They are often used on the rear tire tables. An effective reach of every budget rod holder. Super tough, excellent quality.

• For three rods • Long tube ø 295 mm • 40 mm • Adjustable inter • Mounting plates MatériauxInox marine Weight2, 8 kg

Once it is put into the rod holder, this accessory facilitates a 360°-degree rotation of the fishing rod

Equipped with an adjustment clutch

diamèter 38mm

• Fixing to balcony • ø 20 to 28 mm • 265 mm • Long tube ø 40 mm inter MatériauxInox marine Poids960 g

360 degree rotating and height adjustable rod holder, entirely made of anodized anticorodal aluminum alloy.

The choice of having used such a technical material is undoubtedly inherent to an ergonomic concept on which we are trying to work more and more. In fact, even if the choice of the alloy may seem too expensive for a rod holder, it translates into a combination of strength and lightness without equal, considerably reducing the storage weights with an excellent gain also at the aesthetic level.

Weight 1700 grams.