To create this new serie of stand up rod AB1, unidirectionnal carbon fibers pre-impregneted with differents modulus has been used, and placed with different angles to get the maximum resistance and with the best manufacturing. This has been possible with a big research and devellopment to create and compare the blanks manufactured and check if this new process match the specifications requested ! Final production has been launched with 8 unidirectionnals carbon fiber layers. this can be realized only with a specialized craftmanship
-
-
AB1 50-80lbs Superfast...
Price €1,190.00 -
AB1 Tuna Acid 50-80Lbs...
Price €1,090.00Full carbon fiber curved butt
Fuji rings
unidirectional carbon blank 50-80 Lbs superfast
rotating ring
each blank calibrated on goniometric wall
Ultra V triple finish
-
Tuna Acid 50 lbs superfast...
Price €849.00Carbon reel seat
Fuji rings
unidirectional carbon blank 50 lbs superfast
rotating ring
each blank calibrated on goniometric wall
Ultra V triple finish
-
Ab1 Slow pitch Viper Light
Price €990.00This outstanding new collection "slow pitch" is designed when a slow motion animation on lures is needed or when you are using a livebait such as squid on dritfting for amberjack, dentex, coral trout or sailfish with bonito belly and strike detection is a major part of the hooking.
the particularity remain in the patented AB1 blank single taper, combinating Dynanotex, Carbon/Dynanotex and Carbon and allowing an amazing sensibility and an impressive power starting in the middle of the blank to strike and lift the fish !
you'll be able to use a tenya / madaï or a squid and target amberjack, grouper, with sensibility and an amazing power.
Besides, this amazing blank can be used in a spinning or casting mode, allowing to also target dorado fish with small stickbait !!
-
AB1 Slow pitch Viper Medium
Price €1,029.00Slow Medium / 30 Lbs
1.98 Mt , optimal drag 5kg, Max drag 8Kg
PE 2-3
100-250 Gr
-
AB1 Slow pitch Viper Strong
Price €1,049.00Slow Strong / class line 40 Lbs
1.98 Mt , optimal drag 7kg, Max drag 10 Kgs
PE 3-4
250-400 Gr
-
LINDGREN-PITMAN S2-1200
Price €6,395.00- Standard Features *=Optional
- High Power state-of-the-art 12 VDC motor operation
- Electronic Control and Switching.
- Electronic Counter
- Stop at Top Mode
- Simple Controls
- Hands Off Hauling
- Gear Driven Level Winder
- Ergonomic Cantilever Design
- Electronics Sealed with Inert Gas Atmosphere
- Titanium Spool* Endures Any Type or Size of Fishing Line
- Anodized Aluminum Alloy Construction
- Changeable Spool Design, Quick Change Hub Standard
- 2 Stage Drag System
- External Preset Drag Control & Vernier Control
- Smooth Wide Span Drag Control (180 degrees)
- 0 to 60 lb. Plus Drag Capability
- Designed for Continuous Fishing in Deep Water for Large Fish
- All Line Usable Spool Design
- High Line Capacity Spool
-
LINDGREN-PITMAN SV-1200
Price €7,595.00• Fully Variable Speed (50-400 Feet/min.)
• 110+ lbs. pull at all speeds
• Backlit Digital Line Counter
• Digital Clicker, Standard
• Brushless, Sensorless Motor
• Built-in adjustable level winder
• Factory Installed Quick Release Hub
• Interchageable SpoolHands Off Hauling
- Gear Driven Level Winder
- Ergonomic Cantilever Design
- Electronics Sealed with Inert Gas Atmosphere
- Titanium Spool* Endures Any Type or Size of Fishing Line
- Anodized Aluminum Alloy Construction
- Changeable Spool Design, Quick Change Hub Standard
- 2 Stage Drag System
- External Preset Drag Control & Vernier Control
- Smooth Wide Span Drag Control (180 degrees)
- 0 to 60 lb. Plus Drag Capability
- Designed for Continuous Fishing in Deep Water for Large Fish
- All Line Usable Spool Design
- High Line Capacity Spool
-
LINDGREN-PITMAN SV-2400
Price €10,480.00The new SV-2400 24 volt electric reel is 50% faster and pulls 75% harder than our ever-popular 12 volt S-1200.
By operating on 24v instead of 12v the performance loss from voltage drop is minimized on even the largest of sportfishing boats.
• Variable Speed (100-750 Feet/min.)
• 150+ lbs. pull at all speeds
• Backlit Digital Line Counter
• Digital Clicker, Standard
• Brushless Motor
• Built-in adjustable level winder
• Factory Installed Quick Release Hub -
TALON CARBONE AB1
Price €480.00Carbon butt for 50 Lbs trolling rod. Handmade. 25 % lighter than an Aluminium butt. -
To create this new serie of stand up rod AB1, unidirectionnal carbon fibers pre-impregneted with differents modulus has been used, and placed with different angles to get the maximum resistance and with the best manufacturing. This has been possible with a big research and devellopment to create and compare the blanks manufactured and check if this new process match the specifications requested ! Final production has been launched with 8 unidirectionnals carbon fiber layers. this can be realized only with a specialized craftmanship.