Double inward facing razor blades in a plastic housing will cut 800 lb. leader in a split second.
An absolute necessity for any serious fisherman.
This tool is great for releasing fish or for releasing you. Will cut up to 800lb. mono.
Wrist cord keeps it in quick reach
The ancestor of modern braids still relevant for the backing of your reels or filling your winches.
This little tool is very smart and very well manufactured ! it will help you to open the eye of the hook to add a rolling or a ballbearing swivel for using livebait or chumming.
The advantage offered by this rod holder is the possibility of having 16 fixed positions in rotation for a perfect positioning of the rod in the fishing position, and the possibility of rotating freely through 360 degrees or slightly braked by means of a small adjustable clutch.
Thanks to the possibility of adjusting the inclination of the rod, you can choose the best fishing configuration. As it is tiltable, it is possible to shoe even without removing the rod from the rod holder.
They are supplied with a base to be fixed on the gunwale of your boat.
Dimension of the base: length 9.5cm / width 9cm / thickness 2cm
The Hot's Harness is made of an ultra-light and highly resistant aluminum alloy. Its size has been reduced as much as possible without altering its functions. The cushion on the back of the plate is 20mm EVA foam, ensuring maximum comfort. The rod reception system consists of a cup with a dome-shaped bottom about 30% deeper allowing both to improve stability and to allow the rod to be tilted during fights. The system is also equipped with a quick release pin that can be easily removed. Unlike other harnesses, it attaches and detaches in a single gesture.
High strength and lightweight aluminum. The pad on the back of the plate is 20mm thick EVA
Weight 545gr
Graduation with 500 g. Dial to reset to zero.
Chafing tubing.
Coated polyester braid protector.
A must have for all your riggings ! With using it on a hook/swivel or a snap, it will protect the nylon from friction, reducing importantly the breaking at a friction point.
Clever system that protects your nylon from chafing while offering a quick connection to your swivels.
Suitable for 100lb to 400lb nylons
Mounts vertically or horizontally on rails, handrails or stanchions. Orientable notched wheel.
For all crimps nylon cable.
