Double inward facing razor blades in a plastic housing will cut 800 lb. leader in a split second.
An absolute necessity for any serious fisherman.
This tool is great for releasing fish or for releasing you. Will cut up to 800lb. mono.
Wrist cord keeps it in quick reach
The ancestor of modern braids still relevant for the backing of your reels or filling your winches.
The Hot's Harness is made of an ultra-light and highly resistant aluminum alloy. Its size has been reduced as much as possible without altering its functions. The cushion on the back of the plate is 20mm EVA foam, ensuring maximum comfort. The rod reception system consists of a cup with a dome-shaped bottom about 30% deeper allowing both to improve stability and to allow the rod to be tilted during fights. The system is also equipped with a quick release pin that can be easily removed. Unlike other harnesses, it attaches and detaches in a single gesture.
High strength and lightweight aluminum. The pad on the back of the plate is 20mm thick EVA
Weight 545gr
Asymmetrical design
Multi-species
“White Line” PE braid with carbon core
Super Sharp VMC® Assist Hooks
Asymmetrical design
Multi-species
“White Line” PE braid with carbon core
Super Sharp VMC® Assist Hooks
Asymmetrical design
Multi-species
“White Line” PE braid with carbon core
Super Sharp VMC® Assist Hooks
Asymmetrical design
Multi-species
“White Line” PE braid with carbon core
Super Sharp VMC® Assist Hooks
With its asymmetrical profile and knife point design, the Gomoku Kensaki cuts through the water and sinks quickly • In-line eyelets stabilize the lure during the descent and make it flutter when the line is relaxed • In “Slow Pitch Jigging”, the Gomoku Kensaki is formidable because it produces an erratic action when pulled, followed by a very tight swim while fluttering on the descent • Lure mounted with two VMC Assist Hooks • Sinking
Graduation with 500 g. Dial to reset to zero.
Chafing tubing.
Coated polyester braid protector.
A must have for all your riggings ! With using it on a hook/swivel or a snap, it will protect the nylon from friction, reducing importantly the breaking at a friction point.
Asymmetrical design
Multi-species
“White Line” PE braid with carbon core
Super Sharp VMC® Assist Hooks
